top of page

Using 3D Mapping to Survey Disappearing Arctic Ice

Scientists were able to laser scan snowpatches across 128,000 square meters of terrain in the Norwegian uplands to support climate change research

Nicole Persun

Cool Stuff

Nov 17, 2026

​

When glaciology PhD students from Aberystwyth University in Wales, UK embarked on a project to analyze how quickly ice is melting in the Arctic, they needed large-scale surveying solutions that were reliable and practical amid difficult terrain. The two-week research trip included biological sampling, laser scanning, and ground-penetrating radar surveying in large, remote areas of snow and ice. Their goal was simple: to compare current ice patches with historic LiDAR data. 


The trip was spearheaded by Alice Phillips and Tris Irvine-Fynn of Aberystwyth University,  along with Deri Jones of Deri Jones & Associates Ltd and partners at the Norwegian Institute for Nature Research (NINA). The technology for the project came together rather fortuitously when Nick Godfrey of Central Scanning reached out to see if the researchers had any upcoming projects where they could test the new Artec Jet 3D scanner; the project was the perfect opportunity to see what the scanner could do. 


Juvfonne icepatch and Kilmapark 2469 Ice tunnel, with snow to the right of the tunnel for scale. Images courtesy of Deri Jones & Associates Ltd.
Juvfonne icepatch and Kilmapark 2469 Ice tunnel, with snow to the right of the tunnel for scale. Images courtesy of Deri Jones & Associates Ltd.

Challenging conditions and terrain


Upon arriving in Trondheim, Norway, the researchers were met with poor weather conditions, which could prove dangerous when traversing snow and ice. To circumvent the weather, the team traveled south to Norsk Fjellsenter Museum, where conditions were safer. There, they were able to explore an ice tunnel at the Klimapark 2469 site on Galdhøpiggen, Norway’s tallest mountain, and reach a more accessible snowpatch. 


While the University team took ice core samples, Deri Jones & Associates Ltd (DJA) — who’ve been providing laser scanning services since 2005 — focused on the scanning. To start, they scanned the interconnected rooms in the ice tunnels. Using the Artec Jet scanner, this task — which would’ve taken several hours with a tripod setup — was complete in just fifteen minutes. 


Ice carvings within the tunnel, the site described by Deri Jones as a mix of “Norwegian folklore, archaeology, science, and history.” Images courtesy of Deri Jones & Associates Ltd.
Ice carvings within the tunnel, the site described by Deri Jones as a mix of “Norwegian folklore, archaeology, science, and history.” Images courtesy of Deri Jones & Associates Ltd.

Navigating the ice floor inside the cave and the boulder field at the bottom of the snowpatch required extreme care. The team needed walking poles to navigate the difficult terrain, as well as axes and crampons for a traverse around the top of the sheeting covering the ice tunnel. This meant that hands-free scanning was a must. The team utilized the Artec Jet’s backpack unit, which freed up their hands to focus on safe maneuvering. 


Setting up Artec Jet on backpack at the forefield of the snowpatch. Images courtesy of Deri Jones & Associates Ltd.
Setting up Artec Jet on backpack at the forefield of the snowpatch. Images courtesy of Deri Jones & Associates Ltd.

Technologies used


In addition to 3D scanning with the Artec Jet, the team also used the University’s MALÅ Ground Penetrating Radar (GPR) sled to measure ice thickness. Pairing the snow depth readings from the GPR with the laser scan data from the surface, researchers were able to estimate the volume of snow left. Initial processing of the data was conducted in the Artec Twins software. 


Snowpatch scan data overlaid onto tunnel data (25-meter axis for scale). Images courtesy of Deri Jones & Associates Ltd.
Snowpatch scan data overlaid onto tunnel data (25-meter axis for scale). Images courtesy of Deri Jones & Associates Ltd.

For georeferencing, the team laid out checkerboard ground control points using an Emlid base/rover system, achieving a strong correlation between the scan data and GPS. It took just four days for the team to sample over 120 kilograms of ice, map the area using the GPR sled, and scan the snowpatch’s surface. Using the Artec Jet, the researchers were able to capture 51,500 square meters of terrain in just two hours, with a resolution where they could see the runnels in the ice and individual rocks. 


Snowpatch and forefield captured in just two hours (with a 150-meter scale bar). Images courtesy of Deri Jones & Associates Ltd.
Snowpatch and forefield captured in just two hours (with a 150-meter scale bar). Images courtesy of Deri Jones & Associates Ltd.

A successful trip


By the end of the highly productive two-week trip, the team had managed to survey three different snow patches. They successfully collected 120kg of ice and biological samples and laser scanned 128,000 square meters (plus 180m of ice tunnel), along with 3.4Km of GPR transects. 


The research team’s task now is to analyze the data to determine how much the snow has shrunk and how much remains until it disappears completely — providing essential insight into the impact of climate change and the earth’s dwindling Arctic ice. 


The project served as the perfect test for the Artec Jet and backpack unit, proving that the scanner can handle some of the toughest conditions on the planet, while making research safer, easier, and less time-consuming for researchers. 


Lead image: Deri Jones capturing the upper part of the snowpatch with Artec Jet, courtesy of Deri Jones & Associates Ltd.


For more information: 

Artec Jet

Deri Jones & Associates Ltd

Central Scanning

Aberystwyth University


Read more about 3D scanning >>>

bottom of page